How do I attach Spike to my Smartphone or Tablet?

Last Updated: Jul 28, 2016 03:37PM MDT
Mounting Your Spike: Tablets
(or first generation Spike)
 
We recommend attaching your Spike to a hard tablet case (or smartphone case for first generation Spike) with a flat back, and to metal or hard plastic surfaces. Avoid Silicon-based cases. You may wish to use two cases – one with the Spike attached to it and the other for general day-to-day use. Your Spike comes with strong double-sided adhesive tape for attaching Spike to a case.
 
We recommend attaching Spike to your tablet case as close as possible to the camera, but not obstructing the camera. Spike may be orientated in a position that is most comfortable when holding your tablet in landscape.

            

Mounting Your Spike: Smartphones
With the smartphone clamp, you can attach your Spike to a smartphone with or without a case on it. Place Spike close to the camera, but ensure that Spike does not obstruct the view from your camera or flash.
 
Once you have found the best location for your Spike, use your fingers to squeeze the clamps until they lock tightly around the edges of your smartphone. To release the clamp press the clamp release button.

Note - When Spike is removed from your smartphone, ensure that Spike is returned to the same location as when it was calibrated. We recommend using the buttons on your smartphone as a guide to identify the same location, or adding a mark.

 
If you have any further questions feel free to contact us at support@ikegps.com:
 
Customer Support

Phone: +1 720 381 1634
Toll-free: +1 844 445 3477 ext 3

6:00 am to 6:00 pm (UTC -07:00)
Monday – Friday (Closed on major US holidays)